Crafting At The Start Of May 2013

 Posted by at 02:35 pm
May 042013
 

Welcome to any new visitors and Thank You to any returning visitors for popping over once again to have a look at my blog and also thank you to everybody who’s left comments on my previous blog posts.
(Please don’t think that you have to read every word I’ve written –
– Unless you want to know what I used and how I made a card you don’t actually have to read all the information I provide in the numbered details under each card set, you can just click the thumbnail images to view each card at a larger size, and then click “Back” and scroll down to the next section.
)
-oOo-

I had a “cutting day” on Wednesday, so I’ve got lots of cuts made on my Silhouette Cameo to work with over the next week or so.  A few of them I’ve already made up and you can see below.  I’ve also got lots of varied digi-stamps printed out and ready to colour in and make up into cards.  Some of them I started working on while waiting for “Mr Tesco” to deliver our weekly shop this morning. So that’s more crafting you can look forward to seeing appear on my blog over the next week or so.  One of the digi-stamps I’ve already made into a card was actually a Print & Cut file, so it was a case of printing it out and then cutting it out with my Silhouette Cameo before colouring in and decorating.  I’m quite liking files like this as it means no cutting out of fiddly things by hand.

I hope you like the selection of projects I’ve got to show you this time.

.

CARDS:

(Clicking on the text links below each set of images takes you to the pages where you can see some of what I used to make the cards.)

 

1cup202225_415 - card03C - 1930'S ROLLS ROYCE PHOTOGRAPH, Oval Pyramids 2cup416602_1415 - card02C - Lilac Ruffle Easel -MTC-STUDIO-WPC-PDF 3cup400985_1415 - card01C - Double Octagon Easel Card SVG 4cup400985_1415 - card02C - Double Octagon Easel Card SVG

  1. 1930’S ROLLS ROYCE PHOTOGRAPH, Oval Pyramids by Nick Bowley (I printed the sheet out onto glossy Crafty Bob paper and cut out the base layer and two of the oval layers.  I decided to recycle two sheets of chipboard cardstock, that came as protection either side of a paper pack, to create a base card of 21cm square. I scored using my Hougie Board, then used ultra tacky tape to stick the two together. I matted the base image onto a toning shade of glitter card from kit “Bexley Black Capsule Papercraft Collection” that I’ve got in my crafting stash and trimmed to leave an even border.  Because I was sticking onto glitter paper I used glue gel for this.  I used some background paper from the same kit as the glitter card, cut into four, as corner mats and a matching  panel below.  The matted image was stuck on using 1mm deep, double sided, foam tape and the same tape was used to attach the oval pyramage layers.  This card had no intricate cutting out, only straight edge cutting, so not difficult for somebody with moderate dexterity issues.)
  2. Lilac Ruffle Easel *MTC*STUDIO*WPC*PDF* by Rae Carr (I took the file into my Silhouette Studio software and cut the main easel card layer out of 280gsm linen textured white cardstock using my Silhouette Cameo. The other heart layers and bow I spaced onto the area with registration marks in place and printed them out onto 300gsm Super Smooth white cardstock before cutting them out using my Cameo. I then used fingerlift tape to attach the base layers to inside and front and 1mm deep, double sided, foam tape to attach the second heart layer. I used glue gel to attach the bow layer. This is a very pretty little card that’s easy to make as all the cutting is done using the Cameo.  I’m thinking that I may add some glitter next time, and perhaps put a proper ribbon bow over the paper one. I may also type in a greeting before printing and cutting out.)
  3. Double Octagon Easel Card *SVG* by Rae Carr and butterfly from Layered Doily 1 & Butterfly….SVG by Tina Fitch (I decided to make this card up in red and white, therefore I moved the layers I wanted in white off my working area in Silhouette Studio before I cut the main card and top layers, together with the butterfly, out of red, linen textured, cardstock using my Silhouette Cameo.  I then moved the layers around again and cut out the other layers out a a white version of the same cardstock.  I used finger-lift tape to attach the white panels to the bottom half of the octagon easels, and then 1mm deep, double sided, foam tape to add the red octagon panels and the two layers of the stopper.  I’d gone round the top stopper layer with a red ProMarker and also used the same pen to write “Penblwydd Hapus”, Welsh for “Happy Birthday” on it.  I made up some white roses and rose buds from ready die-cut white spirals, using quick grab glue to stick them together, and stuck these, and some white paper flowers from my crafting stash, onto the card using glue gel.  I also used glue gel to attach the butterfly.  I purposely made the two octagon panels different for interest.)
  4. A closer, angled, look at one of the octagon panels.

1cup410785_198 - card02bC - VASE OF FLOWERS CENTRE STEP CARD 2cup410785_198 - card03C - VASE OF FLOWERS CENTRE STEP CARD 3cup410785_198 - card04C - VASE OF FLOWERS CENTRE STEP CARD

  1. VASE OF FLOWERS CENTRE STEP CARD by Clive Couter (I printed the main stepper card with digi-stamp image, plus butterflies, out from within my Silhouette Studio software onto 300gsm Super Smooth white cardstock and then cut it out using my Silhouette Cameo.  I cut the back of the central panel, together with the add-on panel I’d made to go over the front, out from a pinkey coloured 250gsm pearlescent cardstock, and the front of the decorative central panel out of green, linen effect, 250gsm cardstock.  I used my ProMarkers to colour in the vase of flowers and butterflies.  The colours I used were: Amethyst, Spring Lilac, Orchid, Pineapple Crush, Buttercup, Bluebell, Powder Blue, Apricot, Honeycomb, Meadow Green, Soft Green.  I used a quick grab wet glue to stick on the front and back panels.  I shaped the butterflies and then used glue gel to attach them in various locations over the card.  I haven’t added a greeting yet as I’m not sure what language the card will be needed in, but there’s plenty of room across the front to add one.)
  2. This is a side angle view of the previous card to show the dimension.
  3. And this is a closer look at a different angle.

.

BOXES:

I’ve made two totally different boxes to show you this time.  One is a tower that opens out to show four drawers that are big enough to hold bracelets, earrings, etc.  The second is a shallow box card with room inside for a bar of chocolate or something of a similar dimension.

1cup399663_1415 - card01C - Fancy Drawer Card MTC_SCAL_STUDIO_SVG_WPC 2cup399663_1415 - card03C - Fancy Drawer Card MTC_SCAL_STUDIO_SVG_WPC 3cup410686_1415 - card01C - Candy Bar Card SVG 4cup410686_1415 - card03C - Candy Bar Card SVG

  1. Fancy Drawer Card MTC*SCAL*STUDIO*SVG*WPC by Rae Carr (I opened the cutting file in my silhouette Studio software and moved the pieces on and off the mat as needed to cut out all the pieces. I decided to do the main body and lid of the box tower in white card-stock, the drawers and some decoration in red – both from the same pack of cardstock, and the rest of the decoration in yellow linen textured cardstock.  I used a Red ProMarker to edge around the panels that decorate the outside of the box.  I used a quick grab glue to stick the majority of the pieces together, including lid, boxes, and triangular decoration to lid.  The finished side panels were attached using 1mm deep, double sided, foam tape after I’d glued on the lattice and edged with red.  Although this took a bit of time to cut out, due to the number of pieces, they all cut nice and cleanly.  I was amazed at how easily everything went together once I’d started constructing, with everything being a perfect fit. This is a gorgeous drawer tower for either having on the dressing table holding little trinkets, or for giving to somebody, perhaps with some jewellery in each drawer.)
  2. This is the inside of the opened box that’s shown closed in the previous picture.
  3. Candy Bar Card *SVG* by Rae Carr ( I opened the cutting file in my Silhouette Studio software and cut out the main piece out of purple, 216gsm cardstock.  The panel behind the lattice is a white version of the same cardstock.  After cutting the candy bar card out using my Silhouette Cameo I used a quick grab glue to put the small “box” element for the chocolate bar together.  I simply decorated this with three, yellow, paper flowers.  Perfect little decorative packaging for a small gift of a chocolate bar, or anything else that’s around 1cm deep.)
  4. Slightly angled view of same box card as previous image.

.

CRAFTYBOB.COM UPDATE:

Have a look – here – at my whole shop “Siop Crafftau MAES MIERI Crafts Shop” on craftybob.com.

.

CUP UPDATE:

CUP Mailer – Here are the links to the mailers sent out by the team at CUP HQ since my last blog post:

  • Friday, 3rd May – Here! – The subject line of this mailer says “NEW FREE CD 44 – Whats Hot & Nine New Froms” – don’t forget that you get the Free CD-ROM if you spend £10 or more on the craftsUprint site in one order, and if you check out the mailer you’ll see that it’s not just the Free CD-ROM – there are other freebies as well.

Craftsuprint have a “Mailer Archive” where you can go to get links to mailers sent out over the last few months. This can be seen by clicking – here.

-oOo-

You can see my page on Facebook by clicking – here.

You can see the cards I’ve made using design sheets from CUP in my “Crafter Showcase Area” on Craftsuprint.com – here
(Just scroll down past the top boxes to see the cards.)

-oOo-

(Hi All – You should find a box below where you can leave a comment if you feel like it, but due to the fact that I’ve had some problems with Spam/advertising posts, that are absolutely nothing to do with the content of my blog, I now moderate all comments before they go live. Genuine comments will go live when I’ve checked through the list – usually a couple of times a day.)

-oOo-