Thank you for clicking over to have a look at my blog.
(I know that I write a lot in each blog post – this helps me remember what colours or cardstock I’ve used in case I want to get a similar effect in the future, in addition to providing information that some readers might be interested in – so please don’t think that you have to read every word I’ve written.)
(If you don’t want to know what I used and how I made a card you can just click the thumbnail images to view each card at a larger size, and then click “Back” and scroll down to the next section.)
After an over busy weekend last weekend I’ve not had a good week this week, with the usual aches and pains being much worse aches and pains, so I spent a couple of days without doing any crafting at all. Yesterday I decided that, as my hands and arms were still not up to doing any hand cutting, I’d get out my Silhouette Cameo, sit up in the sitting room, feed paper in, and click “Cut”. I think I managed a couple of hours before I had to give up as even getting the cuts off the mat was causing me difficulty and most of the waste bits were litered all over the floor rather than landing in the bin by my feet I was aiming for.
Today things are a bit better so I decided to make up a couple of simple cards, plus four of the ones I’d cut out yesterday – which in reality look intricate but were quite simple to make up because the intricacy is all in the design and the electronic cutting. These include a card for my father for Father’s Day (not a chance he’ll manage to get online and look at my blog so there’s no problem in me showing this to you now) – this card I made up into an 8″ square card, although the topper can be used as a stand alone item displayed on the stand that also comes in the cutting file.
I hope you like what I’ve made and will take the time to leave a comment at the end. Thank you in advance to all those who do.
(Clicking on the text links below each set of images takes you to the pages where you can see some of what I used to make the cards.)
- Craft Silhouettes SVG by Vicki Avcin (I took the cutting file into the Silhouette Studio software and cut out the pieces from red cardstock and silver mirror cardstock using my Silhouette Cameo. For this card I used mostly the silver cuts, but cut into the red cut of the pincushion to stick onto the top of the silver one. I took an 8″ square Crafty Bob white card and two pieces of pattered paper from my crafting stash – I think they are from a Papermania Capsule Collection pack. One of these was stuck directly to the card front towards the top left, the other was trimmed to fit behind the sewing machine cut, before being attached to the card front using 2mm deep, double sided, foam tap. I went round both these panels using a Red ProMarker as a sort of faux stitching. I used glue gel to attach all the cuts and finished off with some red glitter flourishes from my crafting stash.)
- Dad & Stand…CraftROBO/Cameo by Tina Fitch (I took the cutting file into my Silhouette Studio software and cut it out of blue 216gms, and white 280gms, cardstock using my Silhouette Cameo. I decided to use the layers as a topper on an 8″ square card, rather than presenting it on the stand. I took a Crafty Bob white base card and a 6″ square piece of patterened paper from my crafty stash, together with a sheet of silver mirror cardstock. The patterned paper was cut in four and matted onto the silver mirror board, trimming to leave a border of 3/16 using a Perfect Layers ruler. These panels were stuck directly to the card front using finger-lift tape. I then used 1mm deep, double sided, foam tape to stick on the blue then the white layer of the cuts. I used a Quickie glue pen to attach the top layer. Although I had cut out the further layer of the first D of DAD, I decided not to use it on this occasion, but used dots of silver pearl glue to put a pattern over the letters. I finished off the card by putting black glitter flourishes from my crafting stash at each of the corners.)
- Quiet Country Charm Card Topper 2 by Mary Jane Harris (I printed the design out onto Matte Crafty Bob paper and cut out the main topper and a small number of the added elements. I decided to use it as a topper on an 8″ square card, rather than cutting a base card to match the shape of the topper on this occasion. I used finger-lift tape to attach this. I thne used 2mm deep, double sided, foam tape to attach the paper ribbon and the circular image. I put some silver pearl liquid over the detail on the base card and decided to attach some of the leaves across this area rather than decoupaging them over the leaves by the frame. I’ve not put on a greeting yet as I don’t know what occasion it will be given for or what language it will be needed in.)
- Swirly Layered Card…SVG by Tina Fitch (I wanted a really simple to make card, but that still had the Wow! factor, and I thought that this cutting file was perfect for what I was after. I took the cutting file into my Silhouette Studio software and cut the base card layer out of 280gsm, linen textured white cardstock, and the top swirly layer out of 216gsm linen textured cardstock. I used a Quickie glue pen to attach the swirly layer to the base cad and attached a “Dymuniadau Gorau” peel-off greeting – which is Welsh for “Best Wishes”. I’m also thinking that this design would work well as a sympathy card for those with no religious affiliations.)
- Fancy Stand Card & Box 2…SVG by Tina Fitch (I took the cutting file into the Silhouette Studio software, separated out the pieces and set about cutting everything out using my Silhouette Cameo. The stand was cut out of 300gsm White Hammered cardstock, the base layer of the card out of 280gsm, linen textured white cardstock, and the other pieces out of 216gsm white and lilac cardstock. I’ve used 1mm deep, double sided foam tape and Pinflair glue gel to attach everything together. I finished off with different sizes of toneing sticky back faux gems.)
- Glen of Imaal Terrier Portrait Pyramid by Liz Harrison (I printed the sheet out onto Matte Crafty Bob paper and cut out three of the layers, the largest, smallest, and the one that was just missing the outer frame. I desided to go for a CAS, Clean And Simple, look for this card, so chose to make it up on an Ivory 8″ square Crafty Bob base card. I used 1mm deep, double sided foam tape to attach the base layer and then 2mm deep, double sided, foam tape to attach the other layers and the Happy Birthday greeting.)
Have a look – here – at my whole shop “Siop Crafftau MAES MIERI Crafts Shop” on craftybob.com.
CUP Mailer – Here are the links to the mailers sent out by the team at CUP HQ since my last blog post:
- Wednesday, 5th June – Here! – Crafty Bob Paper SALE & All the latest CUP News
- Friday, 7th June – Here! – NEW FREE CD 49 – CUP’s Hottest Designs and 7 New Froms
Craftsuprint have a “Mailer Archive” where you can go to get links to mailers sent out over the last few months. This can be seen by clicking – here.
You can see my page on Facebook by clicking – here.
You can see the cards I’ve made using design sheets from CUP in my “Crafter Showcase Area” on Craftsuprint.com – here
(Just scroll down past the top boxes to see the cards.)
(Thank you for reading this far. I hope you like what you’ve seen and read – You should find a box below where you can leave a comment if you feel like it, but due to the fact that, like many I’m sure, I’ve had some problems with Spam/advertising posts that are absolutely nothing to do with the content of my blog, I now moderate all comments before they go live. Genuine comments will go live when I’ve checked through the list – usually a couple of times a day.)
(Thank you to every body who’s left comments on my previous blog posts. I really do appreciate them all.)