My YouTube Adventure – So Far!

Thank you for coming over to have a look at my blog

My Craft Demo YouTube Adventure So Far

I’m not sure that this was the brightest idea I’ve ever had, as today’s post is more of a “Behind The Scenes” look that about showing a lot of crafting.  But I hope some of you will find it interesting if nothing else.

This blog post isn’t showing you anything specific I’ve crafted, but you will see me crafting a bit in the video that you will find a link to further down – keep an eye out for sneaky peaks of what I’m working on now!

Fear not, I will be back with more varied crafting before long, but I thought you might like to see the development of my YouTube journey over the last couple of months.  There will be a list below of things I refer to in this post.

I’d also like to ask you if you would be so kind as to pop over to my YouTube Channel and Subscribe if you haven’t already, and also to like and comment on one or two of my videos.  There’s even a bell you can click on so that it will notify you when I upload new videos.

The Begining Of My Journey

Back in a post towards the end of January I asked people who visited my blog, as well as people in some crafting groups I’m in on Facebook, for their thoughts on what they like to see and not like to see in YouTube videos, because I was thinking of starting a YouTube channel to run beside this blog, so that I could show more of “how I did things”, not just “what I’d crafted”.

So many of you helped me out with your opinions, which greatly helped me get some thoughts clear in my mind about what I wanted to do and how to go about it.  So thank you to all who did chip in some opinions and ideas.

I had decided that this would be an ideal opportunity to introduce some Welsh into my presence in the online crafting world.  As a person with Welsh as my first language I had wanted to create some Welsh content online for a while, and my original website is bilingual, but I had found that the layout of the blog interface didn’t lend itself to doing bilingual posts of the type I like makeing (I know I tend to write more than many craft bloggers) without it becoming double the length and people having to navigate over pieces to get to their prefered language.  But I realised that by filming the actual crafting from overhead – a crafter’s viewpoint which many told me was their prefered method of crafting video – and not speaking while crafting, I could actually create two separate videos for Welsh and English by doing two different language voiceovers once the video had been edited.

Seeing other videos I’d realised that I do like seeing the person demonstrating in a video, but didn’t want to be cutting from “overhead” to “pieces to camera” during the crafting itself, so I decided that a short piece to camera at the start and the finish of each video would be the way I’d go, and doing quick pieces like this, in Welsh then in English wouldn’t take up much time to record or to edit.

I also recognised that lighting and camera are important when recording, but knew that I couldn’t afford expensive camera equipment or lighting equipment, so, I decided to use what I had, film when lighting was reasonable and, as I said in my first video, go for a “homely look”, rather than try to get videos of the quality of those who make their living from vlogging or who have studios to record in.

Want to guess what I’m makeing with the bits collected under the tripod? I’ve put a sneaky peak on the Maes Mieri Crafts FB Page.

The one thing I did buy was a tripod and attachments so that I could do my overhead filming.  I had a little, table top, tripod, which would have been fine to film me talking to camera, if that was all I wanted.  But it wouldn’t be able to do the overhead filming, and I’d been wanting something bigger and better for some time, so that I could take steadier photos out in the garden in the summer as well. (Plus – nephews are always coming over with their cameras, often dragging trypods, so having a reasonable one in the house would mean we could all use it and the place wouldn’t get cluttered with them leaving theirs around the place.)

I even bought a book as some light bedtime reading before going to sleep after putting down my tablet for the night.  There are a lot of helpful information in books, as well as lots of quality YouTube videos on how to go about creating YouTube videos and channels. In fact, it is quite amazing how many people have done YouTube videos about YouTube.

Getting My First Videos Online

So after looking and reading I decided to go for it and gathered a few things together and got my first Craftau Maes Mieri Crafts Channel videos uploaded on 24th January – in English and in Welsh.

These videos were just an introduction to me and showing an assortment of the items I’ve crafted over the last year or so.

I decided to take my colour scheme for the Channel from what I already use on this blog and on my website so not to complicate matters – a shade of light purple.

Then it was on to makeing videos with actual craft demonstrations in them.

I’ve even managed to set up two Playlists in my YouTube channel – one showing all my English videos and one showing all my Welsh videos in the order they went online.


I’m not pretending to be a YouTube expert after such a short time of researching and uploading videos, but I thought you might like to see what I have been using and how I have been setting things up.

As I said, I’m going for a more homely look, so I record my pieces to camera when sat in my armchair in the sitting room, and record my overhead crafting pieces sat at the kitchen table.

So now I’ve had my nephew follow me around with a smart phone, recording me as I’m recording pieces for several videos, and I’ve edited it into the following video.

You can see the English version of the video – Here!

Gallwch weld y fideo yma yn Gymraeg – Yma!

Equipment and Software I Use
  • Camera – Fujifilm FinePix XP80 – I actually managed to find a purple one a few years ago when I got mine, but couldn’t find one when researching for this post – so here’s a link to a yellow one.
  • SDHC card – 8Gb SanDisc
  • Tripod – Camera Tripod, TYCKA 55″Lightweight Aluminum Portable Travel Tripod with 1/4″ Quick Release Plate, 360 Degree Panorama Ball Head and Carrying Bag – Nowhere near the most expensive, and means I can have legs extended to different lengths depending on whether I’m working on the table or not.  You can get ones cheaper on Amazon, and as I wasn’t planning on using it for anything more than internal work, rather than carying it around a lot, a cheaper one might well have been enough for me, but because I wanted to add an arm for overhead recording, and because I wanted the nephews to be able to use it rather than carying theirs here all the time, I decided that a slightly more robust tripod would be a good idea.
  • Arm Attachment for Overhead recording – K&F Concept Camera Tripod Boom Arm Stand Fixable External Multi-Angle Center Column Extension Arm (32cm Length, Load Capacity of 5kg) Tilting Rotation – this cost me under £30, but I can’t find it on Amazon, where I got mine, any more.  The closest looking I can find is a little more expensive, but you can see it Here.
  • Video Editing Software – Roxio Creator NXT Pro 7 – as I have done various bits of editing home videos over the years I got a trial of this software many moons ago and have been paying less than full price to update it.  The suite includes PaintShop Pro, in addition to the Roxio VideoWave software that I use to edit.  There are free video editors available for creating YouTube videos, or ones that come on computers when new.  My nephews use these and found them easy to use, but as I was already use to useing VideoWave I decided to stick with it.
  • Photo manipulation software – Sometimes I use PaintShop Pro, and sometimes I just go with quicker, easier, software.  One I have used for many years (don’t want to hazard a guess at how many but I’m sure it is over 10 years), which is free for non-commercial use, and not much for a licence, is IrfanView – Open, Edit, Crop, Save, is all that is usually needed for most photos I take for both my blog and inserting into banners and thumbnails for YouTube.  You can also easily add text in any size and any location on the photo – which really is a must these days with so many people claiming other people’s work as their own (much as I don’t like “defaceing” something I’ve taken time creating by putting something on top.)
  • Laptop – Dell Inspiron 17 5000 Series (16GB DDR3 RAM, Intel (R) Core(TM) i7-6500U CPU @ 2.500GHz, 2TB) – A good speck laptop in terms of office and internet use, but mediocure in terms of the power needed for video editing and authoring.  But those who gave me suggestions before I started thought that around the 10 minute mark would be a suitable length for an edited video I don’t have much trouble with the laptop doing what I need.
  • Books – YouTube Channels For Dummies – Not bad as it made me think about some things I hadn’t realised before, such as that you could put your own thumbnail up with a video rather than accepting one of those suggested by YouTube after upload. (I’ve also got “YouTube Secrets: The Ultimate Guide to Growing Your Following and Making Money as a Video Influencer” for Kindle on my tablet but haven’t started reading that yet so can’t comment.)

I also have an attachment to hold a mobile phone to a tripod to use the phone’s internal camera to record, but I haven’t used this yet.

Feedback Please!

How do you think I’m doing so far?  Is there anything major I need to change?  Do you like seeing a variety of different crafts demonstrated, or do you only like channels that concentrate on a particular craft? 

How do the pieces to camera and the overhead pieces with voiceovers come across on your equipment?  I know that my mother could understand and see everything on my laptop and tablet as I’ve shown her different video’s on each, but I have no idea how they look on different monitors or tablets, or even on smaller mobile devices like smart phones.

As you can see in today’s video, I have a few more projects on the go that I have to do bit by bit because of drying time, etc., and I’m in the middle of recording and editing bits as well, so you should see all those appearing as a finished video before long.  Keep an eye out for those.


  • You can see my Gwyneth George area on Facebook by clicking – here.
  • Crefftau MAES MIERI Crafts Facebook Page – here.
    Please “Like“, “Follow“, and even “Share” if you think any of your friends might be interested.
  • Crefftau Maes Mieri Crafts YouTube Chanel – here.
    Please “Like” and “Subscribe
  • You can see the cards I’ve made using design sheets from CUP in my “Crafter Showcase Area” on – here
    (Just scroll down past the top boxes to see the cards.)
Follow on Bloglovin


Thank you for reading this blog post – I hope you like what you’ve seen and read.
And thank you to everybody who’s left a comment on my previous blog posts – I really do appreciate you taking the time.

You should find a box below where you can leave a Comment if you feel like it.  (If you can’t see the comment box then there should be a link that says “Responses” and clicking on that will bring up the box.) Due to problems with Spam/advertising posts, I now moderate all comments before they go live. Genuine comments will go live when I’ve checked through the list – usually a couple of times a day.
Notice: I’m sure you are already aware that any comments and details you  leave will be stored on the system, and those that go through moderation will be visible to the public.  If you are given the option for the system to store your details so that  you don’t have to fill in all your info each time you want to leave a comment then cookies will be used for this.  Cookies might also be used by the system for logging visitor and return visitor numbers as well.
Notice: Some of my links might be monetised – click Here and scroll towards the bottom for more information.