3D Vase And Fabric Flowers

Thank you for coming over to have a look at my blog

A 3D Printed Vase And Fabric Flowers

Hi and welcome to my blog (or welcome back if you’ve visited before).

Regular visitors to my blog will have seen an assortment of 3D printed items appear in a variety of my blog posts since my nephew first got a 3D printer.  I have posted several times about both the trials and tribulations of this first 3D printer as well as his developing into a designer of his own 3D items.  A quick search for 3D in the box above will I’m sure bring up those things if you are interested.

But for today’s post the 3D element is a Vase – and for the design I went back to Thingiverse for the file.  Unfortunately the print failed a a little before the top (due to a blockage in the nozzle causing first under extrusion then zero extrusion) so won’t look exactly as the designer intended. But, having had a good look at it, and takeing off the top few layers that had not adhered properly, I decided that it would still work as a vase for the faux flowers I was makeing.

Just in case there were other weak bits in the printing that wasn’t obvious to the eye, I did decide to paint it inside and out using ModPodge, which acts as both sealant and glue.

You will notice that it is printed in several colour tones – this is because I used a “varigated” filament.

The flowers were made using some Craft Buddy flower making items, wire stems and florist tape.  I wanted each flower to stand individually therefore didn’t completely fill the vase of add foliage.

What I Used To Make The Vase
  • 3D Printer Used – Creality Ender 3 Pro
  • Design – Flower Vase large twist by mistertech (Licensed under the Creative Commons – Attribution – Non-Commercial license)
  • PLA Filament – Noulei PLA Filament Silky Shiny Rainbow Multicolor – The 1Kg reel of filament has lots of colours in it, it just happened that these were the colours at the end where we started from – a sort of pale maroon red through to silver.  When I get my nephew to print me something else from this reel it will start at the silver and go into another colour.
  • Glue/Sealant – ModPoge, Glossy
  • Brush
The Finished Vase

This is what the vase looked like after tidying it up and brushing over ModPodge.

And a bit closer look.

What I Used To Make The Flowers
The Finished Flowers

This is the box of material flower layers, plastic components and tool I started off with.

I made up lots of flowers using several different shades of flower layers that I thought would work together as one flower or as flowers put together in a vase.  Some flowers have a touch of yellow or green on individual layers.

Some are made with more layers to make the appear fuller.

I put them together in the 3D printed vase, bending and curling the ends of the wires to give different height to the flowers, rather than cutting the ends off.  This mean that I could make the ends of the flowers intertwine and help support each other in the position I put them in – I didn’t want to fill the vase until tight as I wanted the individual flowers to stand out.  For this reason I didn’t add greenery either.

Looking at the vase of flowers from a top angle.

A view from further down.

And a further view of the flowers in the vase.

Sorry for the messy background.  The kitchen had the best light conditions when I came to take the photographs, and I had several crafting totes and other things still out from a crafting session.

.

I have several bits of different crafting on the go at the moment, so keep an eye out for them over the next few weeks.

-oOo-

  • You can see my Gwyneth George area on Facebook by clicking – here.
  • Crefftau MAES MIERI Crafts Facebook Page – here.
    Please “Like“, “Follow“, and even “Share” if you think any of your friends might be interested.
  • Crefftau Maes Mieri Crafts YouTube Chanel – here.
    Please “Like” and “Subscribe
  • You can see the cards I’ve made using design sheets from CUP in my “Crafter Showcase Area” on Craftsuprint.com – here
    (Just scroll down past the top boxes to see the cards.)

Follow on Bloglovin

-oOo-

Thank you for reading this blog post – I hope you like what you’ve seen and read.
And thank you to everybody who’s left a comment on my previous blog posts – I really do appreciate you taking the time.

You should find a box at the bottom of each post where you can leave a Comment if you feel like it.
(If you can’t see the comment box then there should be a link that says “Comments” or “Leave a Reply” and clicking on that will bring up the box.) Due to problems with Spam/advertising posts, I now moderate all comments before they go live. Genuine comments will go live when I’ve checked through the list – usually a couple of times a day.
Notice: I’m sure you are already aware that any comments and details you leave will be stored on the system, and those that go through moderation will be visible to the public. You may be given the option for the system to store your details so that you don’t have to fill in all your info each time you want to leave a comment – if you choose to accept this option then cookies will be used for this. Cookies might also be used by the system for logging visitor and return visitor numbers as well.

3 Replies to “3D Vase And Fabric Flowers”

Leave a Reply

Your email address will not be published. Required fields are marked *

*