Dec 012018
 

Thank you for clicking over to have a look at my blog
More About My Big Work In Progress

-oOo-

Today I have another update on how I’m progressing with my two quilts for the bunk beds in the very small spare room.

It’s been a long time since my last progress report back in June. I hadn’t intended to leave it so long, but during the nice weather over the summer I took the opportunity to go to sit in the garden early morning and of an evening to putter with my troughs, towers, buckets, etc., of fruit, veg and flowers. In between I had to rest quite a bit. Which didn’t leave me with much sewing time when I could sit at the kitchen table with my sewing machine. As well as the fact that, in the sweltering heat we had here over the summer months, the last thing I wanted to do was sit with a quilt on my lap as I turned and manouvered it through the machine.

Last time I blogged about my progress I said that I wasn’t sure whether I’d go on to tidy up the wadding and backing of the one I was working on as soon as I finished quilting, or whether I’d quilt the second one next. I also said that I wasn’t too sure if I’d got enough quilting, in other words a small enough gap between the rows of quilting just in from the seam around each of the blocks.

I had decided that I would have to give the quilts a quick wash before they were used on the beds, both because I’d used temporary fabric adhesive to attach the layers prior to quilting, and also because they had been dragging on what was at times quite a dirty kitchen floor a lot of the time while they were being worked on. I therefore figured I would be better off seeing the effect of a low temperature wash on the quilt, as far as wadding shrinkage etc., was concerned, to give me an indication of how washing affected the quilts, before I went ahead with the quilting of the second quilt.  So completeing one quilt to the end was the aim.

So decision having been made I pushed ahead with completing the side to side quilting on the one I was working on.

I did pull out a couple of packs of new wadding, that I’d bought ready for other projects I plan on doing in the future, and I couldn’t tell the difference between the wadding I’ve used and the wadding I’ve got new in a pack that says you can quilt 8″ appart. So that means that, with the patchwork blocks being 8″ and the quilting lines being inside the edges of the blocks, the amount of quilting I had decided on would be fine.

This is one block having been quilted.

As I used black thread, the stitching doesn’t show on the black sashing, but I have stitched a line on the black the same distance from the seams as I’ve sewn on the patches. Doing the quilting in black may not be usual but I thought it looked best for this project in view of the fact that the sashing and backing are black.

I’d cut the wadding and backing larger than needed originally, to allow for some wiggle room and movement as I went through the various stages.

So onwards with trimming and tidying. I trimmed the wadding to the same size as the front.

But rather than trimming the back pannel to the same size and then sewing a binding to the back, folding it over and sewing to the front, I decided to cheat.  I cut a strip of card to twice the width I wanted the binding to be at the front.  I then used the card as a guide to trim the backing – placeing it up to the side of the front and trimmed wadding and then cutting along the other side.

I’d seen quilt binding being held together with clips like these – Dritz Quilting Binding Clips-30/Pkg, Silver  30 for £5.82 as I am writing this.

But I thought – don’t they look just like clips used by little girls in their hair? So I went looking online for larger packs of then. And this is what I found – 50 Pack Snap Hair Clips Hair Barrettes for Kids, Girls and Women, 50 mm (Silver). 50 for £4.99.

Guess which ones I went for! After all, if they didn’t do the job I wanted I could always pass them on for use by a little girl.

But they did work very well.

I folded the edge of the back over to meet the front …

… then folded the doubled over edge right over the front, and used the hair clips to hold it more or less flat in place.

So here it is after being washed in the machine on a Quick Wash 30 degrees C cycle. I gave it a quick tumble in the drier on a Silk cycle as well, before hanging it over the top rail of the bunk beds to dry completely and air.

It’s far from perfect, but I think it’s pretty, and it’s very practical as well.

So once I’d got this quilt hanging I started on quilting the second. You’ll notice I’m using blue quilter’s roll clips to help keep the quilt part that goes through the machine tidily together.

I don’t know whether I mentioned getting a new sewing machine before or not.  My previous one was sounding a bit rough and throwing a wobbly every now and then, so I didn’t know how long it would last. So I started looking out for a new one at a reasonable price.  I found one while at a reduced price earlier on this year, a Brother, like my previous one but a newer model. I hadn’t intended to start using it until the old one failed completely, or at least until I finished the heavy work of quilting and binding both quilts.  But then I remembered that the new one came with an extension table – which I didn’t have on the old one. So when I re-started on the quilting mid November I decided to drag the new machine out of it’s box and set it up.  The extension table may not be very big but it is definately easier to manouver the quilt with it in place, and even using the walking foot the machine is definately more quiet than the old one.

It’s the FS210 if anybody is interested.  It doesn’t come with a walking foot, but I had already purchased a walking, quarter inch and free mossion foot to go on my previous machine so didn’t need those again.

.

So, that’s it for now, but keep an eye out for more posts about how I’m getting on with the last bit of the “‘Big’ Work In Progress”. Hopefully it won’t be too long before I have the second quilt finished and both on the bunk beds.

-oOo-

You can see my page on Facebook by clicking – here.

You can see the cards I’ve made using design sheets from CUP in my “Crafter Showcase Area” on Craftsuprint.com – here
(Just scroll down past the top boxes to see the cards.)

Follow on Bloglovin

-oOo-

(Thank you for reading this far. I hope you like what you’ve seen and read – You should find a box below where you can leave a comment if you feel like it, but due to the fact that, like many I’m sure, I’ve had some problems with Spam/advertising posts that are absolutely nothing to do with the content of my blog, I now moderate all comments before they go live. Genuine comments will go live when I’ve checked through the list – usually a couple of times a day.)
(Thank you to every body who’s left comments on my previous blog posts. I really do appreciate them all.
)

-oOo-

Apr 062015
 

Thank you for clicking over to have a look at my blog.
Design Team Creation

-oOo-

It’s time for another inspiration post from me on the “Dragons Lair Designs Inspiration Blog“. This is more or less what I posted over on that blog.

It’s been a few months since I did a card as an inspiration piece for this blog so I thought I’d make a shaped card to show you this month.  This time I’ve got my die-cutting machine, and a few dies I picked up recently, out to make a card that opens out quite dimensional but still folds reasonably flat for posting (although it would still have to go as a Large Letter in the UK if you wanted to post it, but great for hand delivery).

I used  “The Pansy Collection” kit that was launched on the 1st in the Dragons Lair Designs store.  The colours of this collection are gorgeous and it contains backgrounds that will work well with lots of other items from your crafting stash so you don’t have to make a floral card with it.  I decided to use it for an understated Easter card.

This is a photo of the card I made:

PansyCollectionInsp04

 Iesu = Jesus, Mae’n Fyw = He Lives, Llawenhawn = Let Us Rejoyce

.

Stamping Dragon Designs Item:

Consumables:

Equipment:

  • Scissors
  • My Craft Studio Software
  • Brother Labeling Machine
  • Tattered Lace Shutter Card Die Set
  • Cut&Boss Machine

This is what I did:

I took a lot of the elements from The Pansy Collection into the software and resized it to suite the project I was working on.  I used the software’s digital die-cut function to cut out a cross from the tag.  The elements and some sheets of backgrounds were then printed out.  I cut the tag out by hand using scissors, but used the shutter card die set to cut out the base card from hammered card, and all the matting and layering pieces from my printed out sheets.  I used white on clear and black on clear tape to print out the wording I wanted using my labeling machine.  I then folded the card along the lines indicated and glued everything in place.

These are a few more photos of my card taken from different angles, starting with a close-up of the tag.

PansyCollectionInsp01

PansyCollectionInsp02 PansyCollectionInsp03

 

.

10696269_10205107278634614_866760417390847475_nYou can find the whole “The Pansy Collection” at the Dragons Lair Designs store.  It’s a stunning collection with gorgeous colours in the backgrounds even if you don’t want to concentrate on the pansy theme.

 

-oOo-

And that is it from me for today. I hope my little creations will inspire you to visit the Dragons Lair Designs store and have a play with some of the digital downloads available to buy yourself.

Please visit the “Dragons Lair Designs Inspiration Blog” regularly over the next few weeks as you’ll find various “Inspiration by …” posts appear from the other design team members, as well as colouring tutorials and other posts. I’ll be back with more posts for the “Dragons Lair Designs Inspiration Blog” over the coming months as well, so keep an eye out for those too.

.

FOR YOUR INFORMATION

Dragons Lair Designs Links

  • If you fancy trying out some of Dragons Lair Designs, please do visit the Store to find all sorts of digital goodies for crafting, and the minimum spend is only £2 (you’ll find great digi-stamps and lots more).
  • And why not join the “Dragons Lair Designs Fan Group” on Facebook. It’s a small, fun, group where we have lots of different activities which include exclusive challenges, lots of inspiration and giveaways – and there’s a loyalty club for those who take part as well where taking part gets you points, winning gets you more points, and get enough points and you get a voucher to spend in the shop.
  • The “Dragons Lair Designs” page on Facebook. We love it when people “Like” us!
  • While I’m not a fan of Pinterest and especially people’s habit of posting images, digi-stamps, etc., to the site that they’ve got no rights to, you can follow designer Janette Padley on Pinterest!
  • See us on CraftsUPrint
  • Dragons Lair Designs Challenge Blog : new challenge every month
  • Dragons Lair Designs Inspiration Blog : a showcase/inspiration blog for lots of different crafting made using Dragons Lair Designs.
  • Then of course there’s the Dragon Boss Lady’s own blog – Straight From The Craftroom

-oOo-

 

You can see my page on Facebook by clicking – here.

You can see the cards I’ve made using design sheets from CUP in my “Crafter Showcase Area” on Craftsuprint.com – here
(Just scroll down past the top boxes to see the cards.)

Follow on Bloglovin

-oOo-

(Thank you for reading this far. I hope you like what you’ve seen and read – You should find a box below where you can leave a comment if you feel like it, but due to the fact that, like many I’m sure, I’ve had some problems with Spam/advertising posts that are absolutely nothing to do with the content of my blog, I now moderate all comments before they go live. Genuine comments will go live when I’ve checked through the list – usually a couple of times a day.)
(Thank you to every body who’s left comments on my previous blog posts. I really do appreciate them all.
)

-oOo-

Apr 012015
 

Thank you for clicking over to have a look at my blog.

-oOo-

Today a new collection is being launched in the Dragons Lair Designs store.  It’s full of different items for you to download and is called “The Pansy Collection”.

A few days ago I gave people a sneaky peak at this new collection when I posted a digital scrapbook layout I’d created using elements from The Pansy Collection and a photo of flowers from our garden that I’d taken a few years ago.

I’d used My Craft Studio Elite to put the layout together and it looked like this:

ThePansyCollectionTeaser01

Today I have a card that I made using elements from the collection to show you.

ThePansyCollectionTeaser03

I again worked on the basic layout of this 8″ square card in My Craft Studio, and when I was happy with the layout I created an extra layer of the flowers in the vase and also a digitally punched out butterfly element.

I printed out the sheet on an A4 sheet of 250gsm Super Smooth white cardstock and cut everything out.

I cut everything out and attached the card front using fingerlift tape.  I then used a Sakura Clear Glase pen to give a glazed look to the glass vase.

Jpeg

I shaped the butterfly and the flowers layer and used glue gel to attach them to the card front.  I also used the same glue to attach the Welsh greeting “Penblwydd Hapus” – which means “Happy Birthday”.

These pictures are to try and show the dimension of the elements on the card.

ThePansyCollectionTeaser04    ThePansyCollectionTeaser05

.

Stamping Dragon Designs Item:

  • “The Pansy Collection”

Consumables:

Equipment:

  • My Craft Studio Software

10696269_10205107278634614_866760417390847475_nYou can find the whole “The Pansy Collection” at the Dragons Lair Designs store. It’s a stunning collection with gorgeous colours in the backgrounds even if you don’t want to concentrate on the pansy theme.

 

-oOo-

And that is it from me for today. I hope my little creations will inspire you to visit the Dragons Lair Designs store and have a play with some of the digital downloads available to buy yourself.

Please visit the “Dragons Lair Designs Inspiration Blog” regularly over the next few weeks as you’ll find various “Inspiration by …” posts appear from the other design team members, as well as colouring tutorials and other posts. I’ll be back with more posts for the “Dragons Lair Designs Inspiration Blog” over the coming months as well, so keep an eye out for those too.

.

FOR YOUR INFORMATION

Dragons Lair Designs Links

  • If you fancy trying out some of Dragons Lair Designs, please do visit the Store to find all sorts of digital goodies for crafting, and the minimum spend is only £2 (you’ll find great digi-stamps and lots more).
  • And why not join the “Dragons Lair Designs Fan Group” on Facebook. It’s a small, fun, group where we have lots of different activities which include exclusive challenges, lots of inspiration and giveaways – and there’s a loyalty club for those who take part as well where taking part gets you points, winning gets you more points, and get enough points and you get a voucher to spend in the shop.
  • The “Dragons Lair Designs” page on Facebook. We love it when people “Like” us!
  • While I’m not a fan of Pinterest and especially people’s habit of posting images, digi-stamps, etc., to the site that they’ve got no rights to, you can follow designer Janette Padley on Pinterest!
  • See us on CraftsUPrint
  • Dragons Lair Designs Challenge Blog : new challenge every month
  • Dragons Lair Designs Inspiration Blog : a showcase/inspiration blog for lots of different crafting made using Dragons Lair Designs.
  • Then of course there’s the Dragon Boss Lady’s own blog – Straight From The Craftroom

-oOo-

 

You can see my page on Facebook by clicking – here.

You can see the cards I’ve made using design sheets from CUP in my “Crafter Showcase Area” on Craftsuprint.com – here
(Just scroll down past the top boxes to see the cards.)

Follow on Bloglovin

-oOo-

(Thank you for reading this far. I hope you like what you’ve seen and read – You should find a box below where you can leave a comment if you feel like it, but due to the fact that, like many I’m sure, I’ve had some problems with Spam/advertising posts that are absolutely nothing to do with the content of my blog, I now moderate all comments before they go live. Genuine comments will go live when I’ve checked through the list – usually a couple of times a day.)
(Thank you to every body who’s left comments on my previous blog posts. I really do appreciate them all.
)

-oOo-